PokerTracker

Hi all,
recently, i tried to filter for specific river textures and I struggled to put up a filter with generalised rank of cards. Something like "3 broadways" or "2+ middle cards". So far i dont care on which street these cards hit. Any suggestions as board texture>board cards>river onlz allows to select exact rank of card or overcard.
Thanks for any advice.

If you want 3 broadways you would need to cover all possible combinations by grouping filters. For example:

Code: Select all

((((Broadway Cards (T, J, Q, K, A) Exactly three) AND (NOT (Turn Is A OR K OR Q OR J OR T))) AND (NOT (River Is A OR K OR Q OR J OR T))) OR (((Broadway Cards (T, J, Q, K, A) Exactly two) AND (Turn Is A OR K OR Q OR J OR T)) AND (NOT (River Is A OR K OR Q OR J OR T))))

This covers two possible combinations:

1 - flop all broadway and turn and river not broadway.

2 - flop two broadway, turn broadway and river not broadway.

There are two more possible combinations:

3 - flop two broadway, river broadway and turn not broadway.

4 - flop one broadway, turn and river broadways.

A filter covering all of those will give you what you want.

Guide: Grouping Filters

Guide: NOT Filters

Thanks. in hindsight it is not that complicated.